Product Description
1. LTR-03 is LAUNCH own designed and produced RF-Sensor that provides 98% vehicle coverage to offer the best TPMS solutions for any repair shops or tire shops. It can combine both 315MHz and 433MHz frequencies in one sensor.
2. 4pcs/lot.
4PCS LAUNCH LTR-03 RF Sensor 315MHz & 433MHz Metal
LTR-03 is LAUNCH own designed and produced RF-Sensor that provides 98% vehicle coverage to offer the best TPMS solutions for any repair shops or tire shops. It can combine both 315MHz and 433MHz frequencies in one sensor.
Features with an international leading automotive grade chip, the pressure value of LTR-03 can be accurate to 0.1 BAR. The high Precision Air Valve can effectively prevent air leakage and ensures durability and stability.
With the outstanding and reliable OE level performance, LTR-03 can replace all originalreplace original tire pressure sensors, copy the original tire pressure sensor data and can be programmed indefinitely.
LAUNCH LTR-03 RF Sensor Features:
1. Compatible with over 95% OE sensors
2. Compatible with OE sensors of 315MHz/433MHz
3. Over-the-air wireless programming
4. Battery life of 4 to 6 years
5. Unlimited number of reprogramming for LAUNCH sensors
With ATEQ Tool & Unlimited Programming
Compatible with ATEQ VT47/57/67/36/37/56/QUICKSET X
Program sensor
relearn sensor
read sensor data
active sensor
check TPMS status
Program in Tires with or without Air pressure
Specifications:
Operating frequency
|
315MHz/433MHz
|
Battery voltage
|
3.0V
|
RF transmitter power
|
5~8dBm
|
Storage Temperature
|
-40°C~125°C
|
Working Temperature
|
-40°C~125°C
|
Dimension
|
50.8*24*17.8 mm
|
Weight
|
42g (Metal), 48g (Rubber)
|
IP Rating
|
IP67
|
Package List:
4pcs x LAUNCH LTR-03 RF Sensor 315MHz & 433MHz Metal
Contact US:
Tech Service
5 Steps to install LAUNCH LTR-03 RF TPMS Sensor:
STEP 1: Loose the tire
Remove the valve cap and core and deflate the tire.
STEP 2: Dismount the tire
Clamp the tire onto the tire changer, and adjust the valve at 1 o' clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
STEP 3: Dismount the sensor
With a screwdriver remove the fastening screw and sensor from the V alve stem, then loosen the nut and remove the valve.
STEP 4: Mount sensor and valve
Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
STEP 5: Mount the tire
Place the tire on the rim, making sure that the valve faces the separation head at an angle of 1 80 degrees. Mount the tire over the rim.

Tech support:
1.Email: sales@launchx431.fr
2.WhatsApp: +86 18750906257
www.launchx431.fr