Launch X431 PAD V Register TPMS ID for Nissan Sentra 2024 B18

• Replacement of Body Control Module (BCM)
• Replacement of any TPMS sensor
• Presence of relevant Diagnostic Trouble Codes (DTCs)

• Turn the vehicle ignition ON (engine off).
• Connect the X431 PAD V to the vehicle's diagnostic port.

• Launch the Nissan diagnostic software (version V44.70 or later).
• Navigate as follows:
  Manually Select → North America → American Samoa → SENTRA → B18 → 02/2024–
• Tap [Smart Detection] to perform a full system scan.

3. Read Fault Codes

• From the system list, select [Engine Control Module (ECM)].
• Tap [Read Fault Code] to view any existing DTCs.

 

• Return to the previous menu and tap [WORK SUPPORT].
  
• Select [ID Regist].
  
   
• Tap [Start] to initiate the registration process.
  
   
• Confirm by tapping [OK] when prompted.

At this stage, all TPMS IDs will appear as “Inactive.”

• Using a professional TPMS activation tool (i.e. TPMS 5011 V2, CRT5011E, and iTPMS TPMS Tool), activate sensors in the following order​​​​​​​

1. Front Left (FL)
2. Front Right (FR)
3. Rear Right (RR)
4. Rear Left (RL)

• Wait for each sensor status to change to “Registered.”
• After registration, tap [Stop] to exit the registration screen.

​​​​​​​

• Navigate back and select [Clear Fault Code] from the function menu to erase any related DTCs.

 

• Recheck DTCs to ensure no faults remain.
• Perform a road test and confirm that the tire pressure readings display correctly on the vehicle’s infotainment or control screen.